-Best Value for Polishing Granite and Concrete Countertops;
-DAMO 5" 2.7mm Wet Diamond Polishing Pads Set of 7 including grit 50,100,200,400,800,1500 and 3000;
-DAMO 5" DWP-1257 Variable Speed Wet Stone Polisher;
-DAMO 5" Semi-rigid Back Holder;
-Wet applications only.
DWP-1257 Variable Speed Wet Stone Polisher has new features to perform better than ever. These improvements include variable speed control switch with an automatic speed feed-back system to maintain consistent RPMS with or without a load. This makes it easier for users to see clearly the correspondence between RPM and the switch position they choose to do their polishing job. Furthermore, DWP-1257 has optimized the gear ratio, increased its torque output, makes the job for the operator much easier and efficient.
Specifications |
Equipment Included |
Rating...............................120Volts 60Hz |
* Ground Fault Circuit Interrupter |
Amperage.........................................7A |
* Water Valve & Hose |
Power..........................................800W |
* Faucet / Garden Hose Adapter |
Variable Speed..............700-3,000RPM |
* Lock On Switch |
Weight.............................6.5lbs/2.9kg |
* Splash Guard |
Spindle Size..............................5/8"-11 |
* Extra Carbon Brush Set |
Maximum Disc Diameter........5" /125mm |
* Side Handle, C Handle |
Important Note: It is very important to install the splash guard and control the amount of water used when polishing. You only need to keep the surface slightly wet to prevent dusts, otherwise water can go in the motor and lead to GFCI power protection to kick in and shut it down. When this happens, you need to wait for the motor to dry completely before push the RESET button on GFCI in order for the polisher to work again. This will cause delay in work time and affect motor life.
For light color stones, you may use our DWP4D7BH kit.
No posts found